How the hunt actually goes
- Measure the whole flat first, at night. One module on the input gives you the baseline — the number that should be near zero and is not.
- Halve the problem with the breakers. Switch off a group, watch the baseline drop or not. Two or three rounds and the group is found; this is why the reading has to be live and not a daily total.
- Then put a channel on the suspect group and leave it there overnight. A standby load has a signature: flat with periodic bumps, every few minutes, forever.
- Decide with the counter, not with the spec sheet. A device's standby rating and what it actually draws in your house are two different numbers, and only one of them is on your invoice.