rbAmp
EN
Shop

Solution · RBgrid

See your electricity as money

Your bill is priced per tariff zone, and your meter shows one total in kWh. RBgrid shows what every measured circuit costs, on a hub in your panel: no account, no cloud, no subscription.

What it shows

  • Cost right now per circuit and for the whole house, in your currency
  • Today and month to date, with yesterday for comparison
  • Which tariff zone you are in and when the cheaper one starts
  • Import and export measured separately, export valued at your own rates

Live demo, sample data.

Examples — and what to buy for each

Five real set-ups. Each opens in the live demo with sample data; the kit lists the parts and prices, the article shows how it is built.

What you need

The rbAmp modules measure. The hub collects, computes and stores. You see it in the web app or in Home Assistant.

Which modules and how many for the current release: rbgrid.io/hardware.

An ESP32 board with PSRAM

16 MB flash: an ESP32-WROVER, or an ESP32-S3 on the N16R8 module. One you have or one you buy — you flash it once over USB.

BASIC on the circuits

The circuits you want to see, with your SCT-013 clamps.

BASIC

STD on the supply

Where import and export must be counted on the device.

STD

Your own tariff, computed on the hub

Time-of-use zones with weekends, per-kWh energy tax, grid fee and levies, and VAT — each entered separately and all included in the costs. Export is valued at a per-zone sell price. Live demo, sample data.

Three ways to use it

I want it to just work

Flash the hub, run the setup wizard, see your first costs.

I run Home Assistant

The hub announces every point over MQTT; Home Assistant creates the sensors.

I want to build it my way

Full source, an ESP-IDF build, REST, WebSocket and MQTT APIs.

Source and APIs

Everything else is on rbgrid.io

Guides, releases, the web-app documentation and the source code.

RBgrid's hub and node firmware is source-available under PolyForm Noncommercial 1.0.0 — free for personal and non-commercial use; commercial use: info@rbamp.com. It measures and computes costs; it does not switch loads.