rbAmp
EN
Shop
SCT-013 split-core current transformer with a 3.5 mm jack

Sensors

SCT-013 current transformer

Non-Invasive Split-Core Current Transformer for Safe AC Current Measurement

Professional split-core current transformer SCT-013 designed for non-invasive AC current measurement. Perfect integration with RBgrid SDK and RBgrid App. The transformer clips around a single wire without breaking the circuit, providing safe and convenient current monitoring for existing installations.

Model

Overview

Available Models and Specifications

Model Current Range Output Type Output Burden Resistor SKU
SCT-013-005 0-5A Voltage 0-1V Built-in RB-SCT-005
SCT-013-010 0-10A Voltage 0-1V Built-in RB-SCT-010
SCT-013-020 0-20A Voltage 0-1V Built-in RB-SCT-020
SCT-013-030 0-30A Voltage 0-1V Built-in RB-SCT-030
SCT-013-050 0-50A Voltage 0-1V Built-in RB-SCT-050
SCT-013-060 0-60A Voltage 0-1V Built-in RB-SCT-060
SCT-013-100 0-100A Voltage 0-1V Built-in RB-SCT-100

General Specifications:

  • Measurement type: AC current only (RMS with rbpower)
  • Turns ratio: 1:2000
  • Frequency range: 50Hz - 1kHz
  • Accuracy: ±1% (10%-120% of rated current)
  • Phase error: ≤2° at 50Hz
  • Core material: Ferrite
  • Opening diameter: 13mm
  • Cable length: 1m
  • Connector: 3.5mm stereo jack
  • Operating temperature: -25°C...+70°C
  • Dielectric strength: 3kV AC/1min
  • Fire resistance: UL94-V0

Design Features

  • Split-core design - Easy clip-on installation without disconnecting wires
  • Non-invasive measurement - No electrical contact with measured circuit
  • Complete isolation - Safe measurement of high voltage circuits
  • Flexible cable - 1m shielded cable with 3.5mm jack
  • Wide opening - 13mm aperture fits most household and industrial cables
  • Robust housing - ABS plastic with secure snap-lock mechanism
  • Factory calibrated - Ready for accurate measurements

Connection

Physical Installation:

  • Open the transformer core using the clip mechanism
  • Place around a single current-carrying wire (L or N, not both)
  • Ensure complete closure for accurate readings
  • Orient according to arrow marking for correct polarity

IMPORTANT:

  • Measure only ONE conductor (L or N), never both
  • Use appropriate 3.5mm jack adapter module with built-in conditioning circuit

Software Integration

Configuration via RBgrid Web App:

  • Navigate to Sensors configuration page
  • Select "SCT-013" and choose your model variant
  • Specify the GPIO pin connected to adapter output

Technical Advantages

  • Safety first - Complete galvanic isolation from measured circuit
  • Easy retrofit - Install without rewiring or power interruption
  • High accuracy - ±1% across wide measurement range
  • Low phase shift - Accurate power factor measurements
  • Temperature stable - Minimal drift over operating range
  • Wide compatibility - Works with cables up to 13mm diameter

Applications

Energy Monitoring

  • Home energy management systems
  • Solar PV system monitoring
  • Individual appliance consumption tracking
  • Load balancing and optimization

Industrial Applications

  • Motor current monitoring
  • HVAC system control
  • Production line monitoring
  • Preventive maintenance systems

Smart Building

  • Circuit breaker monitoring
  • Sub-metering systems
  • Peak demand management
  • Energy audit tools

IoT Projects

  • Smart plugs and outlets
  • Remote monitoring systems
  • Energy dashboards
  • Predictive analytics

Where to buy

rbAmp shopDirect from the manufacturer.Buy in the shop →